Keine exakte Übersetzung gefunden für مادة ترسيب

Frage & Antwort
Textübersetzung
Übersetzung einfügen
Senden

Übersetzen Englisch Arabisch مادة ترسيب

Englisch
 
Arabisch
relevante Treffer

Textbeispiele
  • Specific TE-PVD processes are as follows:
    والعمليات المحددة في ترسيب الأبخرة المادية بالتبخير الحراري هي كما يلي:
  • Box volume: the product of three perpendicular dimensions is measured in the following way:
    والعمليات المحددة في ترسيب الأبخرة المادية بالتبخير الحراري هي كما يلي:
  • Gaseous reactants are decomposed or combined in the vicinity of a substrate resulting in the deposition of the desired elemental, alloy or compound material on the substrate.
    وتتحلل العناصر الغازية الداخلة في التفاعل أو تجتمع بالقرب من الركازة مما يسفر عن ترسيب مادة العنصر أو الأشابة أو المركب المطلوبة على الركازة.
  • Damage tolerant gas turbine engine rotating components using powder metallurgy materials requiring review by 1.C.2.b. ;
    وتتحلل العناصر الغازية الداخلة في التفاعل أو تجتمع بالقرب من الركازة مما يسفر عن ترسيب مادة العنصر أو الأشابة أو المركب المطلوبة على الركازة.
  • b. Thermal Evaporation-Physical Vapour Deposition (TE-PVD) is an overlay coating process conducted in a vacuum with a pressure less than 0.1 Pa wherein a source of thermal energy is used to vaporize the coating material.
    (ب) ترسيب الأبخرة المادية بالتبخير الحراري هو عملية طلاء فوقي تجري في الفراغ تحت ضغط أقل من 0.1 باسكال حيث يستخدم مصدر للطاقة الحرارية لتبخير مادة الطلاء.
  • Ion Assisted Resistive Heating PVD employs electrically resistive heating sources in combination with impinging ion beam(s) to produce a controlled and uniform flux of evaporated coating species;
    الترسيب بالأبخرة المادية المقاومة للحرارة بمساعدة الأيونات يستخدم مصادر مقاومة للحرارة بصورة كهربائية إلى جانب إطلاق شعاع من الأيونات لإنتاج موجة محكومة موحدة من أنواع الطلاء المتبخرة؛
  • c. “Technology” “required” for the “development” or “production” of gas turbine engine components using “laser”, water jet, ECM or EDM hole drilling processes to produce holes having any of the following sets of characteristics:
    (ب) ترسيب الأبخرة المادية بالتبخير الحراري هو عملية طلاء فوقي تجري في الفراغ تحت ضغط أقل من 0.1 باسكال، حيث يستخدم مصدر للطاقة الحرارية لتبخير مادة الطلاء.
  • b. The diameter of the flywheel housing.
    الترسيب بالأبخرة المادية المقاومة للحرارة بمساعدة الأيونات، حيث تستخدم مصادر مقاومة للحرارة بصورة كهربائية إلى جانب إطلاق شعاع من الأيونات لإنتاج موجة محكومة موحدة من أنواع الطلاء المتبخرة؛
  • The partitioning of hexabromobiphenyl in the environment will be governed by its high log Kow (6.39) and low water solubility (3 µg/L) resulting in sorption to particulate matter (dust, soil and sediment) and organic material (including living organisms). Furthermore, the combination of these properties and the relatively low vapour pressure (6.9*10-6 to 7.5*10-4 Pa) of hexabromobiphenyl, results in a low potential for volatilisation.
    إن تقييم سداسي البروم ثنائي الفينيل في البيئة يخضع لمكافئ تفريق الماء عن لأوكتانول الخاص به (6.39) وقابليته المنخفضة للذوبان في الماء (3 ميكروغرام/لتر) مما ينتج عنه الامتصاص في المادة الجسيمية (التربة، التراب والترسيب) والمادة العضوية (بما في ذلك الكائنات الحية) يضاف إلى ذلك، أن اجتماع هذه الخصائص وضغط البخار المنخفض نسبياً (6.9 *10-6 إلى 7.5*10-4 باسكال) من سداسي البروم ثنائي الفينيل تنتج عنه قدرة منخفضة على التطاير.